Serving Southeast Michigan & Surrounding Areas
24-Hour Emergency Service Available
FAMILY OWNED | LICENSED & INSURED
Generator Installation Canton, MI
Home standby generators sized for Canton houses with central air, sump pumps and EV chargers. Free written quotes from a licensed and insured family company.
Get a Free Estimate
We call you back during office hours, Monday to Friday, 7 am to 5 pm.
Prefer to call? (734) 697-8477
Licensed and insured | Family owned | Free quotes | Office Mon to Fri, 7 am to 5 pm
3D Electric handles Generator Installation Canton, MI for homes on both sides of Cherry Hill Road, from ZIP 48187 in the north to 48188 in the south. We are a family-owned electrical company based in Belleville, about 14 to 16 miles south of the township by way of I-275. This Generator Installation Canton, MI page covers local outages, the township permit office, sizing for busy modern houses, and the repair and maintenance work that follows an install.
Every quote is free and starts with a weekday visit to your panel, meter and yard. You can send the details through our free quote request form or call (734) 697-8477, Monday to Friday, 7 am to 5 pm. Company background and the full list of services are on the 3D Electric home page.
Lectro's tip
Before the quote visit, check whether your sump pump has its own circuit in the panel. It is usually the first thing you want on generator power.
Generator and electrical services in Canton
Why Canton Homeowners Add a Standby Generator
The August 2022 outage
On August 29, 2022, storms cut power to more than 266,000 DTE customers across southeast Michigan. Canton was one of the hardest-hit communities, with more than 2,500 customers in the dark. Many of those homes waited through humid late-summer days with no air conditioning and no sump pump.
Rain, rivers and sump pits
The Lower Rouge River and Pine Creek run through the south end of the township. Homes with basements in those areas lean hard on sump pumps during heavy rain. The storm that knocks out the power is often the same storm that fills the pit, so the pump needs a backup source.
What DTE has changed
In December 2024, DTE replaced wood poles with steel poles at Ford Road and Sheldon Road. That work hardens one busy corridor. Your own street still depends on its local poles, wires and trees, so a home standby generator is the one piece of the system you control.
Whole House Generator Installation for Canton Homes
A whole house generator sits outside on a pad, runs on natural gas or propane, and starts on its own when the grid drops. A transfer switch moves your circuits to generator power and back again when DTE service returns. Our whole house generator installation page walks through each part of the job in detail.
Generac, Honeywell and Kohler units
We install and service Generac, Honeywell and Kohler home standby generators. Past jobs include 22 kW Generac and 22 kW Honeywell units on natural gas. If you already lean toward one brand, read our notes on Generac generator installation before the visit.
Sizing for central air and EV chargers
Many Canton houses carry central air, an electric dryer, a sump pump and a 240-volt charger in the garage. We add up the loads you want running and size the unit to match. When a mid-size generator can't carry everything at once, load management lets big appliances take turns.
Natural gas or propane
Natural gas is the usual fuel when a gas line already serves the house. Which gas utility serves you depends on your address, so check a recent bill. Homes without a gas line can run the generator from a propane tank.
Canton Generator Permits and Inspections
Canton is a charter township, so one office handles permits for all 36 square miles. Canton Township Building & Inspection Services sits at 1150 S. Canton Center Road, and the township posts its electrical permit application on its permits page.
What we file
We pull the electrical permit and meet the township inspector. Gas piping is reviewed under its own permit and inspection. Requirements can change, so confirm the current rules for your address with the township.
Subdivision associations
Many Canton subdivisions have a homeowners association. Association rules are separate from township permits, so ask your board about outdoor equipment before we set the spot. Our guide to home generator permits lists the questions worth asking.
Picking the Generator Spot on a Canton Lot
Narrow side yards
Subdivision lots often leave a slim strip between houses, and that strip is usually where the meter and air conditioner sit. The manufacturer sets clearances from your windows, doors and vents. We measure those and the distance to the lot line before we suggest a location.
Cherry Hill
Cherry Hill pairs a new-urbanist neighborhood with older landmarks such as Cherry Hill United Methodist Church, built in 1882. New-urbanist streets put homes close together and close to the sidewalk. A generator there needs a careful look at sight lines, clearances and the path from the meter.
Finished basements
When the main panel hides behind a finished basement wall, the new wiring needs a planned path. We trace it from the outside wall to the panel before we quote, so drywall surprises come up early.
The wiring run: conduit and gas pipe from the generator to the house, kept clear of the window well.
Generator Repair and Service in Canton
A standby generator is an engine that sits idle for weeks, then has to start on the worst day of the year. When a unit won't start, throws a fault code or runs while the house stays dark, call us. Our home generator repair visits test the engine, the battery and the transfer switch to find which part failed.
Yearly maintenance
Over one summer, mulch beds, grass clippings and leaves can pile up against the base of a unit. A yearly generator maintenance visit clears the vents and checks oil, filters, plugs, battery and a test transfer. Small faults get fixed on a calm day, not during the next storm.
24-hour emergency service available; office hours are Monday to Friday, 7 am to 5 pm.
How a Canton Generator Job Runs
We visit on a weekday, look at your panel, meter and yard, and ask what has to keep running.
You get a free written quote built on a load calculation, with any load management spelled out.
After you approve it, we file with the township and coordinate the gas work.
Install day covers the pad, the generator, the transfer switch and the wiring.
The township inspector reviews the work. Then we start the unit and run a test transfer while you watch.
Before the visit, write down the circuits you can't do without: furnace blower, fridge, sump pump, well pump or medical equipment. That list shapes the size of the generator more than anything else.
Other Electrical Work for Canton Homes
A generator project often brings other electrical needs to the surface. An older panel may need an upgrade, a new EV charger may need its own circuit, or the garage may need better lighting. We quote that work the same way, with a free written estimate. See the residential and commercial electrical services we take on for the full list.
Canton Neighborhoods and Nearby Towns We Cover
This page covers all of Canton Township: Cherry Hill, the Lower Rouge River and Pine Creek areas in the south, and the homes around Canton-Plymouth Mettetal Airport. I-275 runs near the east edge with exits at Michigan Avenue and Ford Road, and US-12 and M-153 cross the township.
Next door, we also install generators for homeowners in Plymouth, Westland, Wayne and Ypsilanti. Our home base is 3D Electric in Belleville, and the full list of service areas shows every community we cover.
Why Choose 3D Electric in Canton
3D Electric LLC is a family-owned company out of Belleville, run by owner Jayson. Our crew ranges from master electricians to electrical apprentices, and we have done electrical work in this area for about two decades. On a Canton job, the same crew handles the load math, the permit, the install and the startup.
We back the work with three guarantees: outstanding workmanship, property protection with floors covered and work areas cleaned up, and straightforward pricing with a detailed written estimate in advance.
✓ Family owned, based in Belleville
✓ About two decades of electrical work
✓ Licensed and insured
✓ Free written quotes
✓ 24-hour emergency service available
Frequently Asked Questions
Canton Township Building & Inspection Services, at 1150 S. Canton Center Road, handles permits for the whole township. We pull the electrical permit and meet the inspector. Gas piping has its own permit. Confirm current requirements for your address with the township.
Yes. We install Generac, Honeywell and Kohler home standby generators in Canton. The brand and size come from a load calculation done at a free weekday visit.
It can if the unit is sized for both, which often means a larger generator. Load management is the other option: it lets a mid-size unit run big loads in turns. The load calculation shows which fits your house.
DTE supplies the electricity in Canton, but the gas utility depends on your address. Check a recent gas bill before the quote visit. If there is no gas line, a propane tank can fuel the generator.
That depends on your association. Township permits and association rules are separate, and you may need both. Ask your board about outdoor equipment rules before we lock in the location.
Yes. We repair and maintain Generac, Honeywell and Kohler home standby generators. A yearly visit checks oil, filters, plugs, battery and a test transfer. 24-hour emergency service available; office hours are Monday to Friday, 7 am to 5 pm.